Traxxas XRT Extended Rear Body Mounts – Raised Side Shell Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extended-height left and right rear body mounts for custom Traxxas XRT bodies or shell conversions requiring additional
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These extended rear body mounts were designed for my custom Traxxas XRT body setup.
The mounts raise the rear body-supporting position above the original Traxxas mounts, providing additional clearance for taller custom shells and modified body installations.
The design uses the original XRT rear mounting area and incorporates reinforced side walls and gussets to support the taller structure. Left and right versions are included.
The parts shown were printed in PETG and successfully installed on my XRT.
FEATURES
Taller than the original XRT rear side body mounts
Left and right versions included
Designed for custom bodies and shell conversions
Uses the existing XRT rear mounting locations
Reinforced and gusseted construction
PETG prototype printed and installed successfully
COMPATIBILITY
Confirmed:
Traxxas XRT with the custom body setup shown in the photos
OEM reference:
TRA7826 – XRT Rear Body Mounts
Not compatible with:
Traxxas X-Maxx
Traxxas Maxx or WideMaxx
The X-Maxx uses a different rear body-support and mounting system.
This design replaces the two side pieces of the XRT rear body-mount assembly. It does not replace the center component of the original TRA7826 mount set.
Fitment with the standard original XRT body has not been confirmed.
MATERIAL RECOMMENDATION
PETG is suitable for this application and is the material used for the installed prototype.
ABS or ASA may be preferable when the vehicle is regularly exposed to high temperatures or direct sunlight, but reprinting a correctly functioning PETG mount is not necessary.
INSTALLATION
Install both mounts at equal height and verify that the body sits level.
Before driving, confirm that the mounts do not contact the shocks and that there is no interference throughout the complete suspension movement.
This is an independent custom design and is not manufactured, sponsored or endorsed by Traxxas.
