1 / 1
Pontiac Fiero Shift and Select Cable Firewall Boot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are designed for the Fiero store cables, made to fit my 88 GT. I'm assuming it will fit others.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Printed in TPU 95a filament. I used 20% infill, you will need supports enabled for the outer lip of the part.
It is a 2 piece design, install the outer bushing into the firewall, slip the inner bushing over the cable, apply a liberal amount of PVC primer to the inner bushing (I did like 3 coats), and install into the outer bushing. Make sure to align the alignment marks.