SeaFrogs zoom gear for Canon EF-S 18-55mm f/3.5-5.6 IS STM
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a zoom gear for the Canon EF-S 18-55mm f/3.5-5.6 IS STM when used with a mirrorless SeaFrogs housing
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This is a zoom gear for the Canon EF-S 18-55mm f/3.5-5.6 IS STM when used with mirrorless SeaFrogs housings (wont work with DSLRs)
Best is to put the gear on the lens from the camera mount side. The contact surface may need a bit of finishing depending on you printers tolerances. The top/front of the gear should line up with the silver line on the lens. The line on the side of the gear should aling with the focal length marker and the "n" in Canon on the front of the lens.
The integrated window can be used to switch on and off IS and AF without taking off the gear (just zoom to select which one is visible)
I use it with a SeaFrogs R50 polycarbonate housing with a FL60 port. (The one intended for the Canon EF-S 60mm Macro) The usable FOV is 24mm (wider is with vigneting) to 40mm (lens hits the ports front glass)
The lens with the gear can be rear loaded into the housing. Getting it out is a bit finicky.
Recomended print settings: PETG, no supports, 0.2mm layer height, 15% infill
