Snowblower windshield un-wrinkler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New snowblower came with a “cab”. The cab itself is a must-have in rural locations to keep wind at bay.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The design of the cab and its mounting structure are quite good, however there is a large wrinkle of sorts right in my line of sight. I found that if I added tension right above my head it un-furled the wrinkle…how to attach the fiberglass cross piece to the fiberglass structure…
Ended up using an old arrow cut to length but the tension doesn’t seem quite right. Plan is to get a piece of fiberglass as an upgrade to increase tension a bit
Modeled up a simple design and printed with PETG.
There are three variations—
9.525; both the upright and crossmember are 3/8”
6.35; both the upright and the crossmember are 1/4”
Hybrid; the upright is 1/4” and the crossmember is 3/8”—this is the one I used and it works great