1 / 3
Adimlab Extruder Cable Tie Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket to put on the top of the extruder assembly so that cable chain and fan wires can be zip tied on the…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a bracket to put on the top of the extruder assembly so that cable chain and fan wires can be zip tied on the Adimlab printer.
Uses two 3mm x 8 scews and two 3mm nuts.
You will need to remove the cable chain put this bracket on and then put the cable chain back on. It's a little tricky, I used tweezers to hold onto the cable chain nuts to install them.
Category: 3D Printer Parts