Magic Money Printer – 3D Printed Magic Trick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make money appear from an ordinary sheet of paper!
- Rating
- 0 / 5
- Likes
- 53
- Downloads
- 242
- Makes
- 0
- Views
- 1,735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🪄 Magic Money Printer — 3D-Printed Magic Trick
Can you make money appear from an ordinary sheet of paper?
The Magic Money Printer is a fun, 3D-printable mechanical magic trick designed to surprise friends and family. Feed in a sheet of paper, turn the mechanism, and watch the magic happen!
The trick uses a hidden mechanical principle to create the illusion. After performing it, you can explore the model and discover how the mechanism works.
✨ Features
• 3D-printable magic trick
• Mechanical — no electronics required
• Fun and easy to demonstrate
• Great for magic tricks and STEM exploration
• Family-friendly design
• Designed for the Designer Challenge: Magic tricks!
🛠 Assembly & Setup
1. Print all the 3D-printed parts.
2. Place the main body on a flat surface.
3. Install the first roller into its mounting slots.
4. Install the second roller into its mounting slots.
5. Attach the crank to the roller mechanism.
6. Cut a sheet of paper to a minimum of 30 × 7 cm, or for best results 50 × 7 cm.
7. Feed the paper into the machine between the rollers.
8. Wrap the paper around the first roller. Tape the beginning.
9. Guide the paper toward the second roller.
10. Wrap the paper around the second roller in the opposite direction. Tape the end
11. IMPORTANT: Look at the side of the machine. The paper should form an S-shape between the rollers.
12. The S-shape allows the paper to travel correctly through the mechanism in both directions.
13. A C-shape is incorrect and will prevent the paper from traveling correctly through both sides.
14. Attach the paper to the roller as shown in the setup.
15. The roller will appear white once the paper is correctly attached. This is part of the magic effect — there is no separate white cylinder to install.
16. Close and secure the remaining body pieces.
17. Slowly turn the crank and check that the paper travels smoothly.
18. Confused about the paper setup? Refer to the 2nd GIF included with this model to see exactly how the paper should be wrapped and attached.
19. Once everything works smoothly, reset the paper and perform the trick! 🪄
⚠ Important: Make sure the paper forms an S-shape, not a C-shape, before closing the machine. This is essential for the mechanism to work correctly.