PTFE Tube Cutting Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutting jig for 8mm ID x 10mm OD PTFE tubes cut to ~20mm with a ~7mm hole in the side
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed a utility knife cutting jig to make PTFE bushings with a side hole for a set screw.
To build: print everything in place, break the print-in-place endstop loose, re-stack the two pieces with the hinge aligned, and add a piece of raw filament and cut to length. If you want to add magnets to the base, it will hold three 6mm x 3mm neodymium magnets.
It's designed for tubes with a 10mm OD, cut length is 20mm, and the side hole comes out around 7mm. I made it right-handed, but just mirror it if you want a left-handed setup.
I've included the STEP files so you can modify it to work better for your projects.