Key Transposition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printed optical illusion where two keys apparently change color and switch places.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Standard Digital File License

INTRODUCTION
This is based on a very cool optical illusion, applied to a 3D-printed object, that allows you to apparently change the color of a key.
Two keys, one black and one gray, can visibly change places. The effect can be repeated several times, and the routine can be extended to include impossible transpositions, with the keys apparently traveling to and from your pockets.
The complete construction and handling are explained in the accompanying video.
PRINTING INSTRUCTIONS
Material: PLA or PETG. You need at least 2 colors; 3 colors are better — two for the handles and one for the blades.
Layer height: 0.20 mm
Nozzle: 0.4 or 0.6 mm
Infill: 20%
Supports: Required for the blades
Print orientation: Print the files as provided. The blades should be printed vertically and the handle halves flat.
Number of printed parts: 6 — 4 handle halves + 2 blades. For the extended pocket version, print these 6 objects twice, for a total of 12 printed parts.
THE PRINCIPLE
The illusion relies on the spectator’s viewing position and the special design of the handles, which creates the illusion that you are seeing both sides of the handle, even though the handle actually contains openings.
The two keys are made from differently colored handle sections combined with the blades. When the keys are held at the correct angle and orientation, the spectator perceives each handle as a normal, single-colored key.
By turning the keys upside down, you create the illusion that the colors of the handles have changed. The illusion is very sensitive to the viewing angle, so correct alignment is essential.
FABRICATION & ASSEMBLY
After printing, you will have:
Two handle halves in one color
Two handle halves in the other color
Two blades
The handle halves are designed to fit together in only one way. Glue one handle half of each color together to create the two bi-color handles.
Apply a small drop of glue to the smaller joining surfaces, which will be between the two halves and therefore invisible. Then glue the blades to the assembled handles, exactly where the two colors meet.
The blades can be positioned on either side, but for a more deceptive illusion, I recommend positioning the two blades in opposite directions. See the video for more details.
The accompanying video is strongly recommended, as the exact alignment, angle and handling are much easier to understand visually.
SETUP
The illusion only works from a limited viewing angle. Determine which direction the blades need to face for your particular setup.
When holding the keys at your fingertips, make sure the blades are perfectly aligned and pointing in the correct direction — directly to the left or directly to the right, at 90 degrees angle to the spectators.
Even a small change in angle can break the illusion. (Practice in front of a mirror ;-)
PERFORMANCE
Hold one key in each hand, maintaining the correct alignment. Close your hands while simultaneously rotating the keys, changing their orientation so they are turned upside down.
When you open your hands again, the two keys appear to have changed places. The transposition can be repeated several times.
For a clean ending, you can print one additional sets of keys and use them to perform a pocket transposition, apparently sending each colored key to the opposite pocket.The final sequence allows the keys to be removed from the pockets and handed out for examination. See more details in the accompanying video…
TIPS & IDEAS
Alignment is everything. Keep the blades perfectly aligned throughout the handling.
The accompanying video is strongly recommended, as the exact alignment, angle and handling are much easier to understand visually.
LICENSE — NON-COMMERCIAL USE ONLY
This design is provided for personal and non-commercial use only.
You may:
* Download and print the design for your personal use.
* Use the printed object for your own personal use.
* Share photos or videos of your creations, provided that Mathieu Bich is credited and the original Printables page is linked.
You may not:
* Sell or redistribute the STL files.
* Upload or share the STL files on other platforms.
* Sell the printed objects.
* Use the design or printed parts for commercial purposes.
* Modify and redistribute the design or modified STL files.
* Use the design for print-on-demand or manufacturing services.
Commercial use requires prior written permission from Mathieu Bich.
SUPPORT MY WORK
If you enjoy my magic and would like to support my work, you can support me on Patreon (nothing on it yet but soon ;-)
ABOUT THE CREATOR
Created by Mathieu Bich, professional magician and creative consultant.
If you are looking for a magician for an event, or for creative consulting and magic design for a project, you can discover my professional work here:
Or simply search for Mathieu Bich on YouTube and discover magicians from around the world performing magic I have created. 😉