1 / 4
243 Winchester Ammo Box – 21 Rounds – Roe Buck & fox Lids — image 1
1 / 4

243 Winchester Ammo Box – 21 Rounds – Roe Buck & fox Lids

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D printable ammo box designed for .243 Winchester cartridges, with interchangeable hunting-themed lids.

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
59
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A practical 3D printable ammunition box designed for .243 Winchester cartridges. The box is made for hunters who want an organized and durable way to store and transport their ammunition. It can be combined with different hunting-themed lids, for example roe buck, deer, fox motifs.Parts required for assembly

The photo shows all parts needed to assemble the 5.6x52R ammo box:

  • 1 × ammo box body

  • 1 × lid

  • 1 × sealing/gasket frame

  • 2 × printed hinge/locking parts

  • 6 × M3 screws, cut to 35 mm

  • 6 × M3 nuts

Assembly

  1. Clean all printed parts and remove any support material or loose filament.

  2. Drill all screw holes carefully with a 3 mm drill bit.

  3. Cut the M3 screws to approximately 35 mm using a screw/wire cutting tool.

  4. Position the lid, hinges and locking parts as shown.

  5. Push the M3 screws through the prepared holes.

  6. Fit an M3 nut to each screw.

  7. Tighten carefully until everything moves smoothly and sits securely.

  8. Do not overtighten the screws, as this can damage the printed parts.

Tip: Black M3 screws look especially good with the hunting-style ammo box.

Tags