Adjustable Height Keyboard Tray
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: Washer_0.2mm_PLA_MK3S_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.06 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adjust BOTH the front and back elevation of your keyboard to any elevation to conform perfectly to your typing style
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Do you have issues finding a comfortable position to type while at the keyboard?
This fully adjustable height keyboard stand, designed around the new Logitech MX Keyboard, allows you to bring your keyboard to a new level. (Pun intended)
Both the front and back support elevation can be independently adjusted to find the perfect elevation and angle for any typing style.
Most every other keyboard stand has you stuck in one position for eternity, this new stand allows you to change your keyboard location at any time to meet your needs. Adjust the legs to optimize wrist comfort at any time.
Designed to fit with most existing wrist pads, and other keyboards, this is the ultimate keyboard stand.
To assemble:
1st: Connect the two halves of the keyboard tray together. Glue is recommend for a permanent hold.
2nd: Thread the (4) supports arms onto each of the (4) Threaded feet.
3rn: Insert the support arms into the hole and slot on both sides of the keyboard tray.
4th: using a self tapping screw attach the washer to the support arms. These can be purchased at your local hardware store or McMaster Carr https://www.mcmaster.com/90380A324/. M2x0.4 x 4 Screws
5th: Place your (Logitech MX) Keyboard onto stand and adjust to your perfect elevation and angle!
(Optional 6th): Add non-slip rubber to the bottoms of the adjustable feet for better grip on slick surfaces.