11 hole renaissance Rackett instrument by Adrian (V1) (15 hours rounded up)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Racket based on mixed sourced but ending on 103 cm bore length with nominal unit spacing on bore holes tuning with 6 mm
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 1
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Racket based on mixed sourced but ending on 103 cm bore length with nominal unit spacing on bore holes tuning with 6 mm bore. its pretty small and pretty awesome.
.
Print in PLA and I tested with 25% infill but depending on your preffered sturdy vs acoustic synergy is with the mass and density you can alter it a bit
used roughly 150 grams of PLA rounded up.
I would probably recommend 20% for better acoustics
.
.
Note: I did indeed snatch reed template by PyroSteel and scaled into assorted testing sized and also knabbed the staple by PyroSteel and re scaled. BUT that is it EVERYTHING else is original and crafted by me on rhino 3d THEY ARE MEERLY INCLUDED FOR CONVENIENCE THEY ARE NOT PART OF THE BUILD I CAN TAKE THEM OUT AND NOTHING WOULD CHANGE EXCEPT ACCESS TO REED FITTING YOU CAN USE A BASSOON REED.