Wall Hanger for DeWalt Bandfile (And Others)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall hanger designed for the 20V DCM200 18" bandfile from DeWalt. May fit other DeWalt tools.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple wall hanger for the DeWalt 20V bandfile, to keep it easy to access, and not take up valuable drawer or cabinet space. Works with the arm extended or folded, with or without battery. If you are going to hang it with the battery installed, don't hang it directly under a piece of trim like I did. Or make a spacer. I don't leave the battery installed in mine while stored. Mounts with two 5mm or #10 screws.
Originally I designed this for my bandfile, but it should also fit some other DeWalt 20V tools with a similar handle design. Verified to also fit both my angle grinder, and oscillating multi-tool.
For best strength, this is intended to be printed in the orientation in which it will be used. Don't try to skimp on material, and use plenty of perimeters, otherwise don't blame me if it breaks and your sander falls. I printed this out of Polymaker ABS on my Voron 2.4, using a 0.6mm nozzle at 0.3mm layer height, 4 perimeters, and 20% infill.