Pirates of the Caribbean – Cursed Aztec Gold Coin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
🏴☠ Print your own cursed treasure! 💀 80 mm Aztec coin, ready for gold filament or gold acrylic paint. ✨
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
🏴☠ Pirates of the Caribbean – Cursed Aztec Gold Coin
Bring a piece of cursed treasure to your collection! Inspired by the iconic Aztec gold from Pirates of the Caribbean, this detailed coin features a central skull surrounded by raised ornaments and intricate patterns.
Whether you prefer bright gold or an aged, weathered finish, this is a fun project for printing and painting. Display it on your shelf, add it to your pirate collection or give your gaming setup a little extra treasure. 💀✨
🎨 YOUR COIN, YOUR FINISH
Print directly in gold-colored filament, or turn a plain print into your own hand-painted treasure.
• Gold filament: a straightforward way to achieve a golden appearance without painting.
• Gold acrylic paint: apply thin coats to preserve the fine relief details.
• Gold acrylic marker: useful for coloring raised ornaments and adding highlights.
• Antique finish: add a dark wash to the recesses, then lightly dry-brush the raised details with gold for extra depth and contrast.
Carefully remove the supports and clean up the contact points before painting.
🖨 INCLUDED 3MF PROJECT
The 3MF includes the upright model orientation, print settings, filament settings and manually painted support areas.
The saved project uses a Bambu Lab X2D profile with a standard 0.4 mm nozzle and a customized PLA profile. When using another printer, select your own machine profile and review the settings before slicing.
📐 ORIENTATION & QUALITY
Print the coin upright, standing on its edge, to give the decorative faces the intended detail quality. Keep the orientation provided in the project.
• Nozzle diameter: 0.4 mm
• Layer height: 0.16 mm
• First layer height: 0.20 mm
• Walls: 2
• Infill density: 100%
• Infill pattern: Zig Zag
• Top shell layers: 6
• Minimum top shell thickness: 1.0 mm
• Bottom shell layers: 4
• Wall generator: Classic
• Wall order: Inner wall → outer wall
• Seam position: Aligned
⚙ PRINT SPEEDS
The following values are saved for the standard direct-drive configuration:
• Outer walls: 60 mm/s
• Inner walls: 80 mm/s
• Infill: 80 mm/s
• Internal solid infill: 80 mm/s
• Top surfaces: 80 mm/s
• Gap infill: 80 mm/s
• First layer: 50 mm/s
• First layer infill: 80 mm/s
• Supports: 80 mm/s
• Support interfaces: 50 mm/s
• Bridges: 25 mm/s
• Travel: 200 mm/s
Overhang slowdown is enabled. Actual printing speeds may be lower depending on cooling, flow limits and the size of individual details.
🏎 ACCELERATION
• Normal printing: 1,000 mm/s²
• Outer walls: 1,000 mm/s²
• Top surfaces: 1,000 mm/s²
• Travel: 1,000 mm/s²
• First layer: 200 mm/s²
These reduced acceleration settings are part of the supplied profile for this upright print.
🌳 SUPPORTS & BED ADHESION
• Supports: Enabled
• Support type: Normal, manual
• Painted support areas: Included in the 3MF
• Top Z distance: 0.10 mm
• Bottom Z distance: 0.16 mm
• Support/object XY distance: 0.35 mm
• Top interface layers: 2
• Bottom interface layers: 2
• Interface spacing: 0.50 mm
• Brim mode: Auto
• Configured brim width: 5 mm
• Brim/object gap: 0.10 mm
Import the full 3MF project to retain the painted support areas. Check the sliced preview before printing, especially if you change the scale, orientation or printer profile.
🌡 MATERIAL & TEMPERATURES
The coin can be printed in PLA or PETG. The included material profile is configured for PLA with:
• Nozzle temperature: 220 °C, including the first layer
• Textured PEI bed temperature: 55 °C, including the first layer
• Filament flow ratio: 0.98
• Maximum volumetric speed: 21 mm³/s
• Regular part cooling fan: 40%
• Auxiliary cooling fan: 40%
• Overhang cooling fan: 100%
• Part cooling disabled for the first layer
For PETG or another filament, use an appropriate material profile and adjust temperatures, cooling, flow and support separation to suit your filament and printer.
📸 SHOW YOUR TREASURE
I would love to see your printed coins! Upload a Make and share your choice of filament, painted finish or weathering effects.
Happy printing, and may your treasure remain curse-free! 🏴☠✨
Note: made with neural4d