47″ RGB Floor Lamp Stability Base | PETG | A1 mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low, wide 175 mm stability base for a 47-inch RGB floor lamp, designed for A1 mini printing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple base / adapter for a 47-inch (120 cm) RGB LED floor lamp. It is designed to reuse the original bolt supplied with the lamp; no extra hardware is needed. The 175 mm-wide circular base is approximately 10 mm high and is intended as a cleaner, smaller alternative to the original tripod. Compare the centre mount on your lamp before printing; similar-looking lamps may have different dimensions.
Suggested starting settings: PETG recommended; PLA may also work. Use 0.20 mm layers, 3 wall loops, 8% infill, flat on the build plate, no supports. The files include an STL mesh and a Bambu Studio 3MF print profile for the A1 mini. No AMS is required.
All images are digital renders, not photographs of a physical print. Physical fit and stability have not been tested.
