Durst 670 elevation column pinion gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pinion gear for Durst M670 darkroom enlarger column lift, replaces worn/broken original nylon part.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Replacement pinion gear for the Durst M670 enlarger's column elevation mechanism. This nylon/plastic pinion meshes with the toothed rack on the column to raise and lower the enlarger head via a rack-and-pinion drive.
The bore dimensions are modeled to be a tight, snug fit on the original steel shaft — this is intentional to avoid slop once installed. As a result, the hole may need to be slightly filed or reamed to fit properly; it's designed tight on purpose rather than loose, so a small amount of manual fitting is expected and normal.
A set screw hole is included to secure the gear to the shaft, matching the original mounting method.