Filler Brace for 2040 Extrusion (Prusa Bear, Sidewinder X1, etc.)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A brace for the Filler Spool Holder to work with 2040 aluminum extrusions used by Prusa Bear, Sidewinder X1, etc.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 273
- Makes
- 3
- Views
- 1,497
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a brace for the Filler Spool Holder by HugoHuge to work with 2040 aluminum extrusions instead, such as those used by Prusa Bear, Artillery Sidewinder X1, or Artillery Genius. It's based on the brace for the Prusa MK3S so it has the same lengths and angles.
There is a 6-screw version and a 3-screw version. Choose depending on how secure you want the mount to be.
You can remix this using the provided STEP files provided in the downloads section or directly edit in Onshape.
Required Hardware
- 3 or 6 M5 T-nuts
- 3 or 6 M5x10mm screws
If you have an Artillery Sidewinder X1 or Genius you can use the T-nuts from the original spool holder. So you'll only need either 1 or 2 additional T-nuts depending on the version you chose.
Printing
- Print flat on its side.
- Use 0.2mm resolution.
- Use 3 or more perimeters and 40% or more infill.
- Supports are recommended only in the slot where you slide the spool holder in.
- Consult the original thing for more printing instructions.

