HP Prodesk 400 (G6 & G9) Ethernet Port Flex IO Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to fit a M.2 A+E Key 2.5Gbe Ethernet Adapter as replacement for the Flex IO port on the HP Prodesk 400 mini pc
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a 3D-printable mounting adapter for installing an M.2 A+E-key 2.5GbE NIC in the rear Flex IO opening of compatible HP Mini PCs.
The adapter securely holds the external RJ45 module in the Flex IO opening while the NIC replaces the factory Wi-Fi card in the M.2 A+E-key slot.
NIC used:
https://www.amazon.nl/-/en/dp/B0DNT16FM2?ref=ppx_yo2ov_dt_b_fed_asin_title
Features
• Adds a 2.5GbE RJ45 port
• Uses the existing rear Flex IO opening
• Bolts securely to the computer chassis
• Requires no permanent modification to the computer
• Uses standard M2 hardware
Compatibility
Tested with:
• HP ProDesk 400 G6 Mini pc
• HP ProDesk 400 G9 Mini pc
Print does require support due to the material that is being removed in comparison to the original model this version was based upon, due to the necessity for the NIC to sit lower in the case in order for the top lid to close properly.
Printed it with ABS since the piece sits inside the computer.