HANDMADE Stamp with Handle – for Packaging, Clay and Leather
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mirrored so it prints the right way round, with a push-on knob handle. Make your own text or logo stamp in your browser.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A HANDMADE stamp for makers – brand your packaging, tags, clay, leather or soap. The face is mirrored, so the print reads the right way round (see the second photo). The knob handle prints separately and push-fits into a hex socket on the back, so it never twists, and a small notch marks the top edge.
Make it with your own name, text or logo
Free, no sign-up, runs in your browser. It also makes raised relief and engraved plates:
https://3dmakerbench.com/3d-stamp-generator
Files
handmade-stamp-with-handle – the stamp (face up) and its handle (knob down), side by side on the bed
Tips
Ink on paper: TPU (flexible filament) gives the most even print. PLA and PETG work well on clay, leather, wax and soap.
Lightly sand the face with fine sandpaper for a crisper print.
Push the handle's hex peg into the socket; add a drop of glue if the fit is loose.
Print settings
Layer height: 0.12–0.16 mm
Walls: 3–4
Infill: 20% (100% for TPU)
Supports: none – print as the file comes
Material: TPU for ink, PLA or PETG for clay and leather
Made with 3D MakerBench – free, browser-based 3D printing generators.