Nvidia P100 fan shrouds
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
dual 92mm axial fan adapter, 93mm blower fan adapter
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Dual adapter to connect one 92mm axial case fan to two GPUs
Designed for an HP Z440, which leaves one PCIe slot width between the GPUs. Take the lower air intake case fan out of the bracket and attach it to the dual fan shroud, then turn the idle fan speed all the way up in the BIOS. I recommend reducing the power limit with nvidia-smi to 150W, which should keep the temperature in the 70s under full load with normal room temperature. I'm pretty sure this adapter would also work in an HP Z420.
Single 93mm blower fan adapter
Adapts a single 93x33mm blower fan to a single P100 GPU. Probably too long to fit in any reasonably-sized case.
The adapter should snap into the end of the GPU, and you can use M3 screws to attach it more solidly. Due to a tight fit around the power connector, you will probably need to plug the power cable in before attaching the fan shroud. Tested with Nvidia Tesla P100 GPUs, but should also fit P40, and possibly other models with the same form factor.