Elipson 1813 Rhapsodie Speaker Grill Frames
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple redesign of grills for the Elipson 1813 speakers.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Open Community License v1.1 + Micro Business v1
These are a simple redesign of grills for the Elipson 1813 speakers. I wasn't able to find images of the back side of the originals, so these are an estimation from looking at photos online of the fronts.
They might work with other models from the series. I used thin material, if you want to use something heavier you might need to generate slightly smaller models. Step file attached so you can change the size. -- Edit the first sketch dimension and the rest should flow out.
Frame Assembly:
One drop of super glue on each arc leg
Press legs into the slots, hold until glue sets. (binder clips can help)
One drop on the connection between the two arcs.
Attaching cloth:
Using a slightly stretchy material gives the best result. I recommend using cotton. T-shirt material works well.
Cloth dimensions:
Woofer: Exact size of square
Mid: 1cm wider and taller than size of square
Tweeter: 2cm wider and taller than size of square
Grill cloth should be cut to shape.
Attached using a soldering iron to melt the plastic and grab the cloth. PLA, the iron at ~260 works well.
Start in the middle of opposite sides, work your way down to the corners.
Pull the corners taut and attach to the bottom edges. Trim with exacto.
My velcro needed a bit of super glue to get it to hold very well.
Good luck, hope this helps someone out!