1 / 2
Ergo Rest for the 60% F12 Keyboards — image 1
1 / 2

Ergo Rest for the 60% F12 Keyboards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A modular ergonomic keyboard wrist rest that lets you angle the pads in the orientation of your wrist rests.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
14
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

This started as a design for the Logitech MX competition but turns out I don't have a MX keyboard so I created a variant for my own keyboard!

The base is designed to rest snug against they keyboard without interfering with the feet. I've made two version here. 

  • The first with a 10x3mm magnet to keep the rest in place after you've placed it at the angle you want. I used a small amount of glue to keep them in the prints. I'm pretty surprised how well this worked out. They're not too strong to make it a pain to re-orient. 

  • Option two is the peg variant. Just slide the wrest down on the peg to keep in in place. Handy if you don't have any magnets on hand.

The base is printed in PLA with basic 0.2 layer height. No need to get fancy here. 

The rests you can print out of whatever you like! I printed mine in TPU air and they're surprisingly comfortable. If you have some on hand I recommend it. Should would well in standard TPU as well. I even printed out a test piece in PLA and it felt pretty comfortable as well. 

  • 0.2 layer height

  • 3 walls for a little more stiffness

  • 15% gyroid infill

  • I used the default 75A Siraya Tech profile for my Centauri Carbon with good results. 

I've included the step files for anyone to redesign as they see fit. Couple ideas I had were to make different length bases or perhaps ones that curved away from the center of the keyboard. Have fun!

Similar magnets to what I had on hand:

https://www.amazon.com/VSKIZ-Refrigerator-Muti-use-Neodymium-Whiteboard/dp/B0BVY5VYQY?

Tags