Nissan 370z Phone Mount adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nissan 370z OEM like minimalist Phone Mount adapter (flat and sphere variants)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Recommended Print Settings
It's pretty easy print, the only thing to recommend is to use some durable material.
I don't recommend using PLA. Also when printed from PETG, my car detailer cracked it by mistake, so I went with PCCF in the end (I think ASA would also be alright).
My used settings:
0.4 nozzle
0.2 mm layer (STRUCTURAL)
30% gyroid infill
organic supports only on build plate
Slicing position:

Installation
remove the shifter surrounding (it's one click)
unscrew 2 screws holding the right side knee pad
unclick the knee pad
mount the holder on it
click the knee pad back
screw the screws back in
click the shifter surrounding back in
PROFIT!
You can see the process of the knee pad removal for example in this video:
https://youtu.be/cnjUirAzxJA?t=15
Be careful, this video shows removal of screws on the drivers side,
but the adapter is for the passenger (right) side.
And here are some pictures to help you find that:



The original story
This model is based on SLOPOS's original model form thingiverse (which is no longer available). I've modified it to use with sphere based phone holder.
Now I'm sharing the remix (sphere variant) and also the original model (flat variant) for anyone who want to use this.
Here's SLOPOS's original story:
After installing an Android Auto head unit into my car, I realized there was really no space to put my phone if I had a passenger. The cubby and drink holder are too small and I have a touring so I cannot replace my switches with a pocket without losing functionality.
I started searching for car mounts and outside of the universal clip on mounts, it seems that the only 'factory feel' phone mount for the 370z has a few drawbacks. First, it's about $80 and apparently (based on reviews) cuts into the passenger knee room enough to be a nascence. I also wanted something that the phone could just be slotted into without needing to use two hands and something without magnets or metal plates as those can mess up your GPS and compass when using the phone for those functions.
Because I'm a cheap skate with too much time on my hands I started looking into ways to make a factory look option that would stay out of the way of the driver and passenger as much as possible and be easy to install. I've iterated about 10 designs over the past few days and finally have a working design.
This solution mounts the phone a bit up and out of the way more than similar mounts, and also has a much smaller contact patch with any of the visible leather pieces to avoid marring it. The one downside from the other mounts available is that it does require that you remove the knee pad to fit it (pop out the shifter surround and unscrew two screws to remove this panel). Other than that it's friction fit and holds extremely securely using a redundant screw hold that nissan left in their injection molded part.
I've built it around a cheap phone mount that normally clips into an air vent (no affiliation, just like the design: https://smile.amazon.com/gp/product/B09B9R8BXF/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1) so this is really just an adapter for the mount that makes it very small, out of the way and stable. Technically you could use this with any of the 'vent clip' phone holders, or simply change up the head to work with virtually any phone mount out there; this would just give a stable base to mount it on.
The original licence CC BY-NC is preserved.