Ghostbusters Slimer Posable Eye / Arms / Body (No AMS)

Ghostbusters Slimer – Movable Eyes, Arms & Body (No AMS)

✨ Remix Model:

• The original model has excellent proportions and balance, so I remixed it into a movable version that does not require AMS.

• Along with making the model articulated and full-color, I added details to the head and back, as well as a base.
  

⚙ Print settings reference:

The 3MF file with Bambu Studio profile settings is available here
https://makerworld.com/models/3332929

📌 3D Printing & Assembly:

• For assembly, please refer to the assembly instructions at the bottom of this page or the attached PDF.

• The fit of each part may vary depending on the 3D printer, filament type and moisture, and profile settings. Please adjust each part as described in the assembly instructions.

• To move the eyes, prepare a sewing needle or similar tool with the tip bent, as shown in Step 3-3④ of the assembly instructions.
  

☕ Feel free to support me at:

https://buymeacoffee.com/andcraft3d

⚠ Remix Fan-Made Work:

• This is a fan-made, unofficial design. All rights to the original character belong to their respective owners.
  

🛠 Assembly Instructions:

PARTS LIST

1 – Mouth Assembly

• Too tight: Sand.

• Too loose: Secure with double-sided tape or glue.

2 – Arm Assembly

• Too tight: Sand.

• Too loose: Secure with glue.

• Assemble the right arm in the same way.

3–1 Temporarily Secure the Eye Parts

• Move “slimer_eyes” back and forth repeatedly until it loosens, then bend it to 90°.

• Fit the "slimer_eyes" into the "slimer_body_upper", then temporarily secure the eyes with masking tape or similar.

3–2 Insert the mouth part

• ① With the body lying on its back, insert the “Mouth Part” assembled in Step 1 all the way in.

• ② Turn the body face down.(When turned face down, the mouth part will naturally align.)
  

3–3 Inner Part Assembly

• ① Attach the “slimer_inner_2” to the body.

• ② Joint Adjustment(Use the gaps shown in the diagram as a guide. Adjust the joint tightness with tape, felt, non-woven )fabric, plastic sheets, etc.

• ③ With the body still face down, insert “slimer_inner_1”

• ④ Hold down “slimer_inner_1” with your finger while checking the eye and arm movement.
  

• For eye movement, use a sewing needle or similar tool.
  (Bend the needle as shown, about 2 mm from the tip.)

4 – Base Assembly

• Assemble it as shown in the diagram.

5 – Final Assembly

• Too tight: Sand.

• Too loose: Secure with double-sided tape or glue.
  

• The base ball joint may become loose over time.

• If this happens, wrap tape around the blue area in 4 – Base Assembly ② to adjust the joint tightness.