1-Gang Patress Box Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a spacer for a 1-Gang Patress box. There's a 2-gang version lurking here:…
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 415
- Makes
- 3
- Views
- 1,446
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a spacer for a 1-Gang Patress box. There's a 2-gang version lurking here: https://www.thingiverse.com/thing:2862775
I was fitting some controlled light switches (Sonoff T4: https://www.itead.cc/sonoff-t4eu1c-wi-fi-smart-single-wire-wall-switch.html) and a couple of my patress boxes were too shallow; hence the need for a spacer (easier than chopping out the brick or plasterboard for a deeper patress box).
Yes, I know you can buy these for not-a-lot from a DIY store but I wanted black and they're not so freely available and I needed, not so easily available, 20mm deep ones for the switches I was fitting to UK standard shallow light switch boxes.
I've included the Fusion 360 design so you can tweak it to suit.
I've uploaded 10, 15 and 20mm versions as stl files.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
Doesn't Matter
Supports:
No
Infill:
20% or more
Category: DIY