SAS/SATA Cable Dust Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple dust cover for SAS or SATA cables. I was using a fanout cable and some of the ends didn't have anywhere to…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 70
- Makes
- 1
- Views
- 524
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A simple dust cover for SAS or SATA cables.
I was using a fanout cable and some of the ends didn't have anywhere to plug-in... so I made this simple cover to stop them getting full of dust and dead spiders.
Printed in PLA it should be an easy sliding fit on the cable connector and not come off too easily; but as machines and slicers vary, I'd suggest printing one as a test and then tweaking the Y scaling if it's too tight or too loose.
I've included the Fusion360 file if you'd rather play with that than scale in your slicer.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2 ish
Infill:
20%
Category: Computer