1 / 3
MCZ MUSA 2.0 AIR ESPHome Remote Case V4.7 — image 1
1 / 3

MCZ MUSA 2.0 AIR ESPHome Remote Case V4.7

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Compact case for XIAO ESP32C6 + CC1101, with USB-C and external SMA antenna. Four printable parts.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
24
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

Compact four-part case for my MCZ MUSA 2.0 AIR ESPHome remote: Seeed XIAO ESP32C6, CC1101, external USB-C access and an SMA antenna. Size: 110 × 64 × 44 mm. V4.7 is printed, assembled and fits my hardware.

Print the four STL files at 100% in millimetres. Base: bottom on the bed, opening up. Lid: smooth side on the bed. Both clamps are supplied in print orientation; place the ESP clamp with its broad, flat side on the bed. Use four M3×10 screws for the lid and two M3×10 screws per clamp. Check the cable routing before closing the lid.

With a 0.6mm Nozzle the screwholes can be a bit tight to get the M3 screws going, i might post an updated version if people report problems. If the screws wont start smoothly use something to widen the hole a bit, once they grip they screw fine. 

Full build, wiring and Home Assistant setup: https://itunsecurity.wordpress.com/2026/09/25/mcz-musa-2-0-air-an-esphome-remote-for-home-assistant/

Tags