Motorcycle handlebar dashboard case (designed for Livewire S2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for a dashboard to show motorcycle information that it obtained over CAN bus
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Case for a dashboard to show motorcycle information that it obtained over CAN bus, was designed to be used with Livewire S2 to show CAN info.
For the case you'll need:
Brass heat inserts:
4x M3
2x M6
Screws:
4x M3x10 or so
2x M6x20 or so
Hardware required:
ESP32-S3-Zero (or similar)
Waveshare 1.69" LCD display (https://www.waveshare.com/wiki/1.69inch_LCD_Module)
Some CAN bus adapter like MCP2551 (5v, requires voltage divider on RX) or TJA1051T/3 (preferred, already 3.3v logic & power)
Some DC-DC step-down to get 5v from 12v
OBD plug - in case of Livewire S2 it's ISO 19689 6-pin (also known as DLC)
Firmware for Livewire S2 is here: https://github.com/blind-oracle/s2-dashboard
For wiring etc also consult the above page.