1 / 3
Lap Desk for Logi MX Keys Mini and Anywhere 3S Mouse — image 1
1 / 3

Lap Desk for Logi MX Keys Mini and Anywhere 3S Mouse

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Collapsible/Travel Lap Desk/Board that perfectly fits the Logi MX Keys Mini and mouse.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted a lapboard to support my keyboard, mouse, and hands as I work without hurting my wrists.  I didn't like any of the lapboards on Amazon because they all have a pillow or are too large.  I wanted it to breakdown easily for travel and, since I'm picky about the size, I had to design it myself.  This lapboard works with many mini keyboards, but the Logi MX have been my favorite for a while and I always travel with them now.

It splits in the center so that it can be printed on the M4KS build plate.  The dovetails hold the board together and the lock slides on from the side to keep the dovetails from sliding apart creating a large flat surface.  It has a tight fit by design and can support my hand and arm as I am using the mouse despite not being directly over my leg.  There is a two-sided taper around the two halves to keep the lock on the board.

Assembly:

1.) Print all 3 parts separately from either v1 or the Slim version and in the given orientation.  The lock should be vertical for strength and may require a brim.  15% infill with 20mm layer height works well.

2.) Align the dovetails and shift one half down into the other half's dovetails until the surface of the board is smooth (may take some effort the first time).  If it's too tight, try putting the other half on top and pressing it down into the first half.

3.) Slide the lock (so it sits under the board) from the side to the center under the dovetails to keep them from shifting up and down.

Disassembly:

1.) Slide the lock slightly to the side.  Shift one half vertically until it separates from the other half.

Versions:

v1: Original design with room for your wrists

Slim: Slim design with no room for your wrists, just slightly larger than the keyboard and mouse (not pictured; I don't like this design as much, it's too small for me)

Tags