1 / 2
Anti moisture silica gel container Fast Print
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Anti moisture silica gel container and cover for hydrometer
- Rating
- 4.5 / 5
- Likes
- 54
- Downloads
- 359
- Makes
- 3
- Views
- 2,721
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Anti-moisture silica gel container
Fast Print possible due to straight pattern.
In two versions.
Important, before the first assembly, a little grease the thread.
The silica gel should be larger than 2.0 mm because the holes are 2.0 mm.
Height 65 mm, with hygrometer lid.
Height with lid 52 m
Diameter 55 mm and 49 mm
Capacity for 70g silicate gel
Printing time together (two parts) about 3 hours.
Layer Height. 0,12-0,28 how you want
Wall Line Count. 7
Top Layers. 4
Bottom Layers. 4
Infill Density 100 %
Print Settings
Rafts: No
Supports: No
Infill:100