ELEGOO Jupiter 2 VAT Tray Stand / Holder

As I use an ELEGOO Jupiter 2 for MSLA printing, I needed a stable stand for safely placing the original VAT during post-processing and resin draining.

Unfortunately, I couldn’t find a suitable existing design, so I decided to design my own.

The stand is designed specifically for the original ELEGOO Jupiter 2 VAT and holds it securely without putting unnecessary pressure on the PFA film.

Reinforcement

For additional rigidity, I used a 33.5 × 33.7 × 400 mm decorative wooden strip as the central reinforcement.

This was simply a piece of material I already had available. The stand itself is very stable and rigid with the reinforcement installed.

The lower part of the stand is intentionally slightly open, providing enough clearance for larger items such as a 2 kg resin container or the wash container to fit underneath.

STEP file included

I have also included the STEP file with the project.

The reason for providing the STEP file is simple: if sourcing the 33.5 × 33.7 × 400 mm decorative strip is difficult in your area, you can easily modify the design to fit whatever reinforcement material or profile you can obtain.

You are therefore free to adapt the stand to your preferred dimensions, reinforcement, or workshop setup.

The design was created as a practical solution for my own Jupiter 2 workflow, but I hope it will be useful to others as well.