Toggle Switch Housing for Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.61 – €0.75 net (excluding VAT)
For file: SchaltergehauseVers2 v2_0.2mm_PLA_MK3S_45m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.68 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 45 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Toggle Switch Housing for Enclosure
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 60
- Makes
- 0
- Views
- 319
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have designed a switch for my LED Enclosure.
Connected to the WAGO 221 and connected to this switch.
The box can be screwed on from below.
I have used 8x15 woodscrews for this.
It works good
Attached there are the Link from the Switch: