Safety 1st Cabinet Lock Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is designed to provide added length to the stock child proofing kit to fit wider than normal doors / handles.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designed this model to provide a longer reach than the standard ratchet that safety 1st provides in their packaging. It does require that you cut the old rod off from the pushbutton lock, but any heavy duty scissors or basic snips would be able to do that.
Of course always check the orientation of the lock so the pointy ends dont protrude into the space instead of lay flat against the doors. Also be careful printing, printers create VOCs when they are running and should be done in a well ventilated space or in a dedicated area.
It prints best on its side with PETG supports if you're using PLA or vice versa!