Frame for 4.2" ePaper display and Seeed Studio EN05/EE05
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A frame for a 4.2" 400x300 ePaper display, as well as a Seeed Studio EN05 or EE05 driver board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a display frame for a 4.2" 400x300 ePaper display, as well as the mount for a Seeed Studio EN05 or EE05 display driver board. This is heavily inspired by the cases designed for the Seeed x OpenDisplay display kits.
To assemble the display, print one of each of the pieces. You'll also need eight M2 10mm screws to properly assemble everything. You can optionally install a 2000 mAh battery as well. The display slots into the frame, then the back plate sandwiches it in place. You'll need an extension cable to connect the display to the driver; the EN05 should come with one.