1 / 7
MX Keys Stand for a Living Room Table (F360 Parametric) — image 1
1 / 7

MX Keys Stand for a Living Room Table (F360 Parametric)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small stand / raiser for Logitec MX Keys keyboard for a conference table in your living room (parametric in Fusion360).

Rating
0 / 5
Likes
6
Downloads
11
Makes
0
Views
176
Reviews
0

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution

I use MX Keys Mini as a remote PC controller from my couch, and I always struggle where to store it. So I came up with this little stand. The keyboard has its own place now and it does not occupy the couch nor the precious space on the table, at least not too much of it.

The model consists of three parts - a clamp and a screw to be mounted onto the conference table, and a pad that goes on top of the octagonal part of the clamp. The pad has a 30 degrees tilt (default) and can be mounted on top of the clamp in 8 orientations, hence its octagonal shape. 

The model is parametric, you can specify:

  • Clamp width (default value 30mm) - how thick your table top is so that the clamp can be mounted to it

  • Keyboard angle (default value 30 degrees) - tilt of the pad 

  • Height (default value 60mm) - how high the keyboard will be placed. To be precise, the value specifies length of the octagonal part of the clamp. 

To modify the parameter values, open attached f3d file in Fusion360 and go to „Modify“ -> „Change Parameters“. Attached STL files use the default values listed above.

Recommended print orientation is shown on attached picture - the clamp is meant to be printed on its side, the pad requires supports.

Tags