90° Shelf Bracket with Gusset
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100 × 100 mm shelf bracket with a hollow 45° gusset and two countersunk screws per leg. Printed on its side.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
100 × 100 mm shelf bracket with a hollow 45° gusset and two countersunk screws per leg. Printed on its side.
Legs 100 mm, 25 mm wide, 5 mm thick
Hollow 45° gusset
Two countersunk holes per leg
Print settings
A1 mini, 0.20 mm, PLA: 34 min (21 g). No supports. Bambu Studio project included.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Checked for overhangs and bed fit, and sliced in Bambu Studio before release. Pictures are 3D renders. Makes and feedback welcome.
Español
Escuadra de 90° para baldas con cartela. 34 min (21 g).
العربية
زاوية رف 90° مع دعامة.