22 LR Ammo Box Ammo Box 50 Rounds fox Lids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printable ammo box designed for .22 LR cartridges, with a hunting-themed lid.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact and practical 3D printable ammunition box designed for .22 LR cartridges. The box is made for organized storage and transport of ammunition and is suitable for hunting, training and range use. The lid can be made with different hunting motifs, for example a fox. 1 × ammo box body
1 × lid
1 × sealing/gasket frame
2 × printed hinge/locking parts
6 × M3 screws, cut to 35 mm
6 × M3 nuts
Assembly
Clean all printed parts and remove any support material or loose filament.
Drill all screw holes carefully with a 3 mm drill bit.
Cut the M3 screws to approximately 35 mm using a screw/wire cutting tool.
Position the lid, hinges and locking parts as shown.
Push the M3 screws through the prepared holes.
Fit an M3 nut to each screw.
Tighten carefully until everything moves smoothly and sits securely.
Do not overtighten the screws, as this can damage the printed parts.
Tip: Black M3 screws look especially good with the hunting-style ammo box.
