GrrCON 2026 Badge Display Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After attending GrrCON 2026, I wanted a way to display my badge, so I made it. Here it is:
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
GrrCON 2026 Badge Stand
A desk stand for the GrrCON 2026 badge, available in two versions:
Open Back: The circular pocket goes all the way through, so the back of the badge remains visible.
Closed Back: The pocket has a solid floor with a small engraved symbol in the center.
Both versions are approximately 90 × 103 × 30 mm, with "GrrCON 2026" engraved into the front.
TOLERANCE NOTE
The circular badge cutout is 0.3 mm larger in diameter than the badge as measured with digital calipers, providing clearance for a snug but easy fit.
PRINT SETTINGS
Settings used for the provided models, sliced in Bambu Studio.
Printer: Bambu Lab P1S, 0.4 mm nozzle
Filament: eSUN PLA+ (white)
Build Plate: Textured PEI
Nozzle Temperature: 220 °C
Bed Temperature: 55 °C
Layer Height: 0.20 mm
First layer: 0.20 mm
Walls: 2
Top / Bottom Layers: 5 / 3
Infill: 15% Grid
Brim: None needed
Seam: Aligned
Orientation: Flat on its base, as uploaded
SUPPORTS
Open Back: ON
Normal (auto)
From build plate only
30° threshold
Very little support is generated.
Closed Back: OFF
No supports are needed.
PRINT TIME & FILAMENT
Estimated on a Bambu Lab P1S.
Open Back: Approximately 1 h 18 m — 47 g
Closed Back: Approximately 1 h 28 m — 60 g