Riser for xTool F2 Laser Engraver (when paired with RA3 Rotary)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A riser extends the focus range of the laser for tumblers. Allowing the RA3 Rotary addon to slide under the F2 machine.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The riser extends the focus range of the F2 laser. Most tumblers exceed the focusing range of the F2. Not to mention it’s awkward to setup the RA3 even if it could focus that high. The riser allows the RA3 Rotary tool to slide under the F2 with proper line alignment.
I left a tiny bit of front-to-back wiggle room so you can fine tune your alignment between the F2 Laser lines and RA3 Rotary baseplates.
If you require a taller riser, just scale up the Z axis (only) as needed.
I printed my riser with 3 walls, 15% gyroid infill and auto tree supports. ENJOY!