WallArt - Butterfly Flowers 003

🦋 Butterfly Floral Moon Wall Art

Bring a warm, elegant and nature-inspired atmosphere into your home with this beautiful Butterfly Floral Moon Wall Art.

The design combines a detailed butterfly with a flowing crescent-shaped frame, surrounded by decorative flowers, leaves and fine botanical elements. The result is a soft and harmonious piece that fits beautifully into boho, Scandinavian, modern and cozy interiors. 🌙🌿

It works especially well in:

• 🛋 Living rooms

• 🛏 Bedrooms

• 🌿 Boho interiors

• 📚 Reading corners

• 🧘 Relaxation spaces

• 🚪 Entryways

• 🌸 Nature-inspired rooms

• 🎁 Gifts for butterfly and flower lovers

Printed in matte black PLA, the design creates a beautiful contrast against warm beige, cream or white walls and gives the wall art a very clean and elegant appearance.

✨ Features

• Large decorative butterfly

• Floral and botanical details

• Crescent-shaped composition

• Elegant and balanced silhouette

• Lightweight wall decoration

• Easy FDM print

• No supports required

• Fully scalable

• Easy to mount

• Looks especially beautiful in matte black PLA

📏 Model Thickness: Approximately 3 mm

📐 Scaling

The model can easily be scaled directly in your slicer.

Because the butterfly wings, flowers and smaller botanical elements contain fine details, I recommend printing it larger rather than smaller.

The larger the print, the cleaner and more visible the delicate lines will appear.

Keep the original proportions when scaling.

🖨 Recommended Print Settings

Printer: FDM / FFF
Material: PLA recommended
Nozzle: 0.4 mm
Layer Height: 0.28 mm
Walls / Perimeters: 2
Infill: 15%
Infill Pattern: Rectilinear
Model Thickness: Approximately 3 mm
Supports: No
Brim: Usually not required
Raft: No
Print Orientation: Flat on the build plate
Cooling: 100% after the first layers
Wall Generator: Arachne recommended for fine details

Outer Wall: Up to 250 mm/s on capable high-speed printers
Inner Wall: 200–300 mm/s
Infill: 250–300 mm/s
Top Surface: 150–200 mm/s
First Layer: 30–50 mm/s

💡 Print Tip: Printing the visible side face-down on a textured PEI plate can give the front a beautiful, uniform and slightly textured finish.

For the thinner butterfly and flower details, Arachne Wall Generator can help preserve narrow features more reliably.

🛠 Mounting

For mounting, I recommend double-sided mounting tape.

Because the model is lightweight, only a few small pieces are usually needed. Place them behind the thicker moon and floral sections for secure attachment.

🖤 My recommendation: Matte black PLA on a warm beige wall looks especially beautiful and makes the butterfly and floral details stand out perfectly.