1 / 1
Just one more bed levelling model
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Layer height 0.2 or less Initial layer height 0.2 or less Set Build plate adhesion to Skirt and set Skirt line count…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Layer height 0.2 or less
Initial layer height 0.2 or less
Set Build plate adhesion to Skirt
and set Skirt line count to 5 lines.
Model is made for bed 300*300 So downscale width and length if needed. But keep height 100%
If you need to calibrate nozzle bigger then 0.4mm then scale height proportionally (150% for 0.6 nozzle, 200% for 0.8 nozzle).
Print speed 10 allowes you to level your bed on-a-fly.
Category: 3D Printing Tests