1 / 2
Citrus Juicer - Ribbed Cone on a Pouring Cup — image 1
1 / 2

Citrus Juicer - Ribbed Cone on a Pouring Cup

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two-part citrus juicer: a 12-rib reamer cone that seats inside a 70 mm cup with a pouring notch. No supports.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Two-part citrus juicer: a 12-rib reamer cone that seats inside a 70 mm cup with a pouring notch. No supports.

  • Cup Ø93 × 70 mm (about 350 ml below the seat)

  • Cone plate seats on a 45° ring inside the cup, so both parts print without supports

  • 18 slots of 2 mm let juice through and hold pips back

  • 12-rib cone, 46 mm tall

How it was checked

The reamer and the cup were intersected in CAD at their seated position: 0 contact with 0.3 mm clearance, and lowering the reamer 0.35 mm makes it touch the ring, so it really rests on it.

Print settings

A1 mini, 0.20 mm, PLA, no supports: 1 h 25 min, 63 g + 1 h 01 min, 32 g.

Wash by hand. For food contact, use a food-safe filament and print fresh.

Parametric source included (OpenSCAD or Python/build123d): change the values at the top of the file.

About this design

Designed in code and checked in CAD before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.

Español

Exprimidor de cítricos de dos piezas: cono estriado que asienta en un anillo de 45° dentro del vaso. Sin soportes: 1 h 25 min, 63 g + 1 h 01 min, 32 g.

العربية

عصارة حمضيات من قطعتين: مخروط مضلع يستقر داخل كوب بفوهة للصب.

Tags