HDHomerun Duo Mount for Leviton Structured Media
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HDHomerun Duo Mount for Leviton Structured Media
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 183
- Makes
- 3
- Views
- 909
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
A mounting bracket for a SiliconDust HDHomerun Duo tuner for Leviton structured media panels. I put my tuner in the basement where all of the cables terminate and the main ethernet switch lives. The tuner drops in through the top of the bracket.
Uses the Leviton push-lock pins, but you could use wood screws and a washer if the panel was mounted on plywood.
Fusion 360 .f3d file is provided for modification if needed.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: Depends
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+
Notes:
Doesn't need supports if printed upright, but it will be stronger if printed flat on its back which will need supports.