Pan and Pot Scraper - 4 Corner Radii
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scraper with four different corners (sharp, 8, 18 and 30 mm) to clean pans, pots and trays, plus a thumb hole.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Scraper with four different corners (sharp, 8, 18 and 30 mm) to clean pans, pots and trays, plus a thumb hole.
95 × 65 × 3.2 mm
0.8 mm chamfer on both faces
Thumb hole Ø20
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 18 min, 14 g.
PETG is more flexible and lasts longer. Wash by hand.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Rasqueta de sartenes con cuatro radios de esquina. Sin soportes: 18 min, 14 g.
العربية
مكشطة للمقالي بأربع زوايا مختلفة.