Egg Yolk Separator (sits on a glass)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cone that sits on any glass of Ø45-85 mm: the white drains through three 4 mm floor slots and the yolk stays.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Cone that sits on any glass of Ø45-85 mm: the white drains through three 4 mm floor slots and the yolk stays.
Ø88 × 24 mm, walls at 45°
Slots in the floor, not in the wall, so there are no bridges
Prints in under half an hour
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 27 min, 16 g.
For food contact use a food-safe filament, print fresh and wash by hand.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Separador de yemas que se apoya en un vaso. Sin soportes: 27 min, 16 g.
العربية
فاصل صفار البيض يوضع على كوب.