CR-10s Pro V1&V2 filament guide for filament sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found the initial design interesting, but I added a no bearing wheel and a additional guide so the filament will not…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 94
- Makes
- 1
- Views
- 518
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I found the initial design interesting, but I added a no bearing wheel and a additional guide so the filament will not detach from the wheel, when the tension is reduced.
Also the original sensor bracket is not allowing the filament to be pulled out between the sensor and the extruder, when you have a runout, so I added a short solution with no guide between the sensor and the extruder and a PTFE version, where you can just add a short piece of PTFE tube which can be pulled out, if you have a runout and want to peel out the filament between the extruder and the sensor..
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
50
Filament: Sunlu PLA White
Category: 3D Printer Accessories