Vertical Stand for 3 × 2.5" Drives
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for three 2.5" SSD/HDD drives (7-9.5 mm) with a heavy base and vent slots.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Stand for three 2.5" SSD/HDD drives (7-9.5 mm) with a heavy base and vent slots.
10 mm slots
Tapered walls 30 mm tall
Vent slots in the base
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 52 min, 29 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Soporte vertical para 3 discos de 2,5". Sin soportes: 52 min, 29 g.
العربية
حامل عمودي لثلاثة أقراص ٢٫٥ بوصة.