Cap Rack with 5 Hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall strip with 5 hooks and a lip that keeps caps on. Two 4 mm screws; printed standing so hooks lie on the bed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wall strip with 5 hooks and a lip that keeps caps on. Two 4 mm screws; printed standing so hooks lie on the bed.
170 × 30 mm strip
Hooks 34 mm deep
Diamond screw holes
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 43 min, 24 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Colgador de gorras con 5 ganchos. Sin soportes: 43 min, 24 g.
العربية
علاقة قبعات بخمسة خطافات.