Citrus Juicer with handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Thks Walter for the design! I just wanted to have a handle to easily apply more fore pushing the juicer into the fruit…
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 83
- Makes
- 3
- Views
- 369
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Thks Walter for the design!
I just wanted to have a handle to easily apply more fore pushing the juicer into the fruit and twisting it.
Benefit is, you do not have to use a brim or raft for printing any longer…;)
Since the original size has a 60mm diameter, it tends to be a little gib for regular lemons (the ones at my shop normally come with around 50mm diameter).
So just use the scaling functionality of your slicer to adopt according to the fruit size you want to juice.
v1_2 now has a "healed" STL, so there should be no issues with slicing.
Print Settings
Printer:
SecKit SK-Go²
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
50
Filament:
Sunlu PETG
White
Notes:
...but PLA and ABS should also do..
FreeCAD
model included.
I just marked the imported STL and the designed handle and exported both into one STL.
Therefore I not had to transfer the imported STL into a solid.
Category: Kitchen & Dining