Long Beach (LGB)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scale model of the airport yummy!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Share Alike
A scale model of Long Beach Airport. The base should be printed in grey, blue, or green, and the airport can be printed in any color other than the base color.
This is a key holder. There are spots for 3 keys on the bottom pegs. When you push on the arm at the bottom the indicator at the top goes up for a fun mechanical mechinism.
Quantities
1 of everything except:
3 Push Pins
3 Indicator Pin
3 Levers
3 Indicator Pin Magnet Holders
3 Lever Pins
3 Push Pin Magnet Holders
Assembly
First, glue the Airport model onto the base. You can use the indicator pins in their holes to help align it correctly.
Slide the levers into their corresponding pivot arms and slide a pin into place, gluing the pin into the arms but not the lever
Slide the indicator pins into the corresponding holes in the airport, and glue the magnet holders onto their bases once pushed through to secure them in place
Repeat Step 3 for the push pins, gluing the magnet holders onto the backs to hold them in place
With a small amount of glue, attach your magnets to the magnet holders so they are firmly attached