Enhanced front for the Adderini & Mini Adder M16 stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enhanced front for the Adderini & Mini Adder M16 stock
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I designed a front part similar to my simple M16 buffer tube using a 60 mm piece of 12 mm tube to connect to the Adderini / Mini Adder. Cut the 12 mm tube first, put it in the Adderini and drill a 3 mm hole for the mounting screw. Then glue the tube into the front part for the M16 stock using Epoxy or Super Glue.
The result is a much stiffer front for the M16 stock compared to the plain plastic one. The front also adds another 4-6 cm length to the stock which helps if you are a bit bigger like me. Personally I find the original stock pretty short.
Print this is a stable filament like PET for maximum strength.